David,
How often did the message occur? Were any ACL changes being made at
the time?
Rich
On 20 May 2009, at 01:35, David Freedman wrote:
Anybody seen these messages occur frequently?
May 18 09:19:31 box 575: May 18 08:20:37 UTC:
%C4K_PKTPROCESSING-5-NOTAPPLYINGACL: Not applying Output Acl for
packet
udp srcHost 1.1.1.1 dstHost 2.2.2.2 tos 0 srcPort 934
dstPort 2049
According the error decoder, they are CAM programming issue but that
is about the level
of detail it goes into, I would infer from this that they should
only be seen rarely
but I'm starting to see them frequently, box is 4948 running
12.2(25)EWA10, bugtool
as usual has nothing.
Any pointers appreciated.
Regards,
------------------------------------------------
David Freedman
Group Network Engineering
Claranet Limited
http://www.clara.net
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
