Hi all, I experienced this case not one month ago. I have installation of 1 STM-1 link connected to SPA-2XOC3-POS in 7600-SIP-200 on 7609 in SRC3. It happened when I have problem with my SDH link from my provider. After the problem happened, they tell me that the problem comes from their SDH equipment.
When the problem happened, this message is logged : May 11 06:12:06.069: %DIAG-SP-6-RUN_MINIMUM: Module 1/1: Running Minimal Diagnostics... May 11 06:12:06.701: %DIAG-SP-6-DIAG_OK: Module 1/1: Passed Online Diagnostics .May 11 06:12:07.073: %SPA_OIR-6-ONLINECARD: SPA (SPA-2XOC3-POS) online in subslot 1/1 .May 11 06:12:08.077: %SONET-4-ALARM: POS1/1/0: B1 declared <snip> .May 11 06:13:33.489: %SPA_OIR-6-OFFLINECARD: SPA (SPA-2XOC3-POS) offline in subslot 1/1 SLOT 1: May 11 06:13:33.461: %INTR_MGR-3-INTR: PL3 RX Sequence error My POS interface just restarting on and off at the event. The whole module just shutdown, and back on again, and off again. I am looking for explanation what is the cause of this event. I just don't want to see any problem with my link that cause the whole SPA module to shut off. Thanks for your comment/ideas/suggestion to prevent this event to happen again. Regards, -affan _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
