Hello.
I have problem with NAS-Port on c3825 ISR router. Access-Request packet
contain NAS-Port attribute with 0 value.
May 27 13:54:52.984 GMT: RADIUS: authenticator 37 5A 1D 50 70 7D DF A2
- 9A 8A 22 80 0C C4 A0 6C
May 27 13:54:52.984 GMT: RADIUS: Vendor, Cisco [26] 41
May 27 13:54:52.984 GMT: RADIUS: Cisco AVpair [1] 35
"client-mac-address=0030.4f6d.d45a"
May 27 13:54:52.984 GMT: RADIUS: Framed-Protocol [7] 6
PPP [1]
May 27 13:54:52.984 GMT: RADIUS: User-Name [1] 12 "username"
May 27 13:54:52.984 GMT: RADIUS: User-Password [2] 18 *
May 27 13:54:52.984 GMT: RADIUS: NAS-Port-Type [61] 6
Ethernet [15]
*May 27 13:54:52.984 GMT: RADIUS: NAS-Port [5] 6 0*
May 27 13:54:52.984 GMT: RADIUS: NAS-Port-Id [87] 10 "0/0/0/10"
May 27 13:54:52.984 GMT: RADIUS: Service-Type [6] 6
Framed [2]
May 27 13:54:52.984 GMT: RADIUS: NAS-IP-Address [4] 6
xxx.xxx.xxx.xxx
Why the router sent NAS-Port = 0 ?
How do I get NAS-Port ?
Have You tried to use "radius-server attribute 87 circuit-id" command of
IOS config?
WBR
Roman A. Nozdrin
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
