It have
int fa0/0
30 second input rate 30616000 bits/sec, 13300 packets/sec
30 second output rate 47680000 bits/sec, 12178 packets/sec
int fa 0/1
30 second input rate 27478000 bits/sec, 4672 packets/sec
30 second output rate 19071000 bits/sec, 3774 packets/sec
int ser4/0 (ds3 link)
30 second input rate 43264000 bits/sec, 11862 packets/sec
30 second output rate 28832000 bits/sec, 13590 packets/sec
59376 Total
Thanks
David Granzer escribió:
Hi,
could you post how much bandwidth and packet per second your 7200 ?
Generally upgrade to I/O GE will not
help much because the performance is based on the NPE used.
regards,
David
On Wed, Jun 3, 2009 at 3:52 PM, Juan C. Crespo R. <[email protected]> wrote:
Guys
I have one POP with 90% of CPU Load (WCCP2, QoS and other minor stuff)
and we are thinking about change the IO/7200-2FE by one IO/7200-GE could
this help with this load?
Thanks
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
