Hi All I was studying some HSRP senario which is little bit different than what used to work on , we have 2 routers connected with access ports to internal box which has 2 direct physical layer-2 links to both routers and HSRP is running between VLAN SVIs on both routers across L2 ether-channel between them
if physical link to active router fail , the client will ARP stanby router for MAC of HSRP group IP , my question here is stanby router will answer ARP requests while it still detect that active router is still alive from HSRP over etherchannel between them ? and if yes , what MAC address it will answer with ? the active router owns group vmac address so if standby reply it will reply with bia address and L2-switch the traffic to active router ? waiting for opinions and your experience share best regards --Ibrahim _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
