C2950(config)#vlan 0 Command rejected: Bad VLAN list - character #2 (EOL) delimits a VLAN number (0) out of the range 1..4094.
But go and check the following doc, you will see that VLAN 0 can be used by a Cisco switch to forward DOT1P-tagged voices frames : http://www.cisco.com/en/US/docs/switches/lan/catalyst2970/software/release/12.1_19_ea1/configuration/guide/swvoip.html#wp1034347 Selon Arup Bhattacharya <[email protected]>: > Why VLAN 0 is not configur in Switch where as starting range of VLAN is 0 > and default VLAN is 1....... > > -- > Regards..... > Arup Bhattacharya > GSM-9748238797 > ------------------------------------- > Success is not final, failure is not fatal: it is the courage to continue > that counts > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
