I've got several outdoor Wi-Fi radios that I would like to configure in
a PtP configuration on multiple 802.11a channels.
My question to the list is, "Can I use LACP on each end (via a network
switch) to aggregate those PtP connections into one virtual connection?"
e.g.
http://www.cisco.com/en/US/tech/tk389/tk213/technologies_configuration_example09186a0080094470.shtml
So, instead of using ethernet to each switch, I'm connecting an ethernet
cable from my switch into the 100 Mbps LIM of the radio node, creating a
PtP link across an area, then coming out that other radio's 100 Mbps LIM
via ethernet into another LACP-friendly switch.
So, on each port, there is something like...
switch->ethernet->radio-> 5 GHz PtP link->radio->ethernet->switch
Any feedback on this?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
