Could be yet another prompt-related EEM bug. See http://blog.ioshints.info/2008/02/fix-bugs-in-eem-action-cli.html http://blog.ioshints.info/2007/12/execute-cli-commands-with-prompts-in.html Use the EEM debugging (debug event man action cli) to verify what's going on.
Ivan http://www.ioshints.info/about http://blog.ioshints.info/ > -----Original Message----- > From: Rishi Kochar [mailto:irsk....@gmail.com] > Sent: Saturday, June 13, 2009 12:20 AM > To: cisco-nsp > Subject: [c-nsp] EEM - action syslog working but action cli > command working > > Hi > > I am trying to develop a small EEM applet to test shut a port > when an event on the port occurs. > > The script i have written is > event manager applet EMSHUT > event syslog occurs 1 pattern <my pattern> action 1.0 syslog > priority emergencies msg "HELLO" > action 1.1 cli command "enable" > action 1.2 cli command "conf t" > action 1.3 cli command "voice-port 0/1/1" > action 1.4 cli command "shut" > > > This script is printing HELLO in syslogs but wont shut down > the voice-port. > > Any help on this will be highly appreciated > > Thanks > Inder > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/