On 2009-06-12 22:52, Ross Vandegrift wrote:
No netflow, no uRPF, no multicast, no IPv6, no BFD, no MPLS, no ACLs in the forwarding plane. Very basic OSPF, BGP, and MSTP. About 2000 VLANs, 80% of which have associated layer 3 SVIs.
Something is killing the CPU with that config though, just as Roland remarked. You should escalate that with TAC, or use CoPP to lower the load RP is taking and look for root cause.
On the other hand, I have other 6500s with identical hardware inventory and almost identical config where performance is a complete non-issue. I've seen a 6500 in a near-optimal situation switch 2-3Mpps. I'll believe 30Mpps when I see a 7200 NPE-G1 hit 1Mpps :)
A couple of people on this list claimed they have 6500s doing a 200-300Mpps without a problem, search the archives. I'm logged via SSH to a 6500 that is doing over 80Mpps right now and load stays at 2-5%, with ACLs, uRPF, three full BGP feeds and some QoS. -- "Everything will be okay in the end. | Łukasz Bromirski If it's not okay, it's not the end. | http://lukasz.bromirski.net _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
