No, not a rate limiter it seems:
#remote command switch show mls rate-limit hw-detail | in 0x7
5 Enabled 100 10 0x7F0A LTL
6 Enabled 2000 1 0x7E06 LTL
9 Enabled 100000 100 0x7F08 LTL
10 Enabled 100000 100 0x7F09 LTL
Dave.
------------------------------------------------
David Freedman
Group Network Engineering
Claranet Limited
http://www.clara.net
-----Original Message-----
From: Stig Johansen [mailto:[email protected]]
Sent: Sat 6/27/2009 23:29
To: David Freedman; [email protected]
Subject: RE: 65k SXH2a + internal VLAN brokenness?
David Freedman wrote:
>Broken VRF:
>> CCC [3] = b101 [L2_POLICE]
>> DEST_INDEX [19] = 0x7E00
Not sure, but it seems to me like you are possibly hitting a rate-limiter
(L2_POLICE).
Try finding which rate-limiter it's hitting by searching for the 0x7E00-index
in the output from this command (if it's there in SXH2a.. I have it in SXF and
SXI):
remote command switch show mls rate-limit hw-detail
If it's there, you can find the corresponding rate limiter by matching the Hw
ID from the last command here:
show mls rate-limit usage
Just an idea...
/Stig
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
