It is a 6500 with a SUP2 however other extended ACL's are showing matches with each ACE.
The traffic must be traversing this interface as it is the only way to route out the subnet. Cheers, Aaron. -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Roland Dobbins Sent: Friday, 3 July 2009 10:04 AM To: Cisco-nsp Subject: Re: [c-nsp] matched ACL - counters not updating On Jul 3, 2009, at 8:48 AM, Aaron Riemer wrote: > The permit ip any any shows matches as normal. What am I missing here? If this is a 6500 with an older Sup2, note that ACL counters aren't supported. How do you *know* that traffic matching the ACL stanza in question is actually traversing the relevant interface(s)? ----------------------------------------------------------------------- Roland Dobbins <[email protected]> // <http://www.arbornetworks.com> Unfortunately, inefficiency scales really well. -- Kevin Lawton _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ LEGAL DISCLAIMER: This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
