Hi all, I using Cisco 1812 and firmware version is "c181x-adventerprisek9-mz.124-24.T.bin". My problem is PfR that didn't use OSPF as parent route, it only accept Static route as parent.
My PfR configuration is list below... ----------------- oer master logging ! border 192.168.1.2 key-chain GREEN interface Vlan2 internal interface Tunnel114 external interface Tunnel14 external interface Tunnel113 external interface Tunnel13 external interface Tunnel111 external interface Tunnel11 external ! learn throughput delay periodic-interval 0 monitor-period 1 traffic-class filter access-list pfr-filter expire after time 5 aggregation-type prefix-length 32 backoff 90 3000 mode route control mode monitor passive mode select-exit best periodic 180 ! ! oer border logging local Vlan254 master 192.168.1.2 key-chain GREEN ----------------- Another I see debug information.... ------------- *Jul 3 07:34:45.291: %OER_BR-5-NOTICE: Prefix Learning STOPPED *Jul 3 07:34:45.491: %OER_MC-5-NOTICE: Prefix Learning WRITING DATA *Jul 3 07:34:45.555: %OER_MC-5-NOTICE: Prefix Learning STARTED *Jul 3 07:34:45.555: %OER_BR-5-NOTICE: Prefix Learning STARTED *Jul 3 07:34:29.367: PFR PIRO: Control Route, 10.11.1.16/32, NH 0.0.0.0, IF Tunnel11 *Jul 3 07:34:29.371: PFR PIRO: Control Route, 10.11.1.16/32, NH 0.0.0.0, IF Tunnel111 *Jul 3 07:34:29.371: %OER_MC-5-NOTICE: Uncontrol Prefix 10.11.1.16/32, Couldn't control ------------- I don't know why PfR can't control that prefix... Appreciate your kind advise. Thanks. pigsign _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
