When running labels in BGP (in P routers), one has to use BGP between loopback addresses (and disable the connected check in BGP). When you try to use BFD to enable path failure detection, you get an error that says BFD can only be used with connected hosts.
Is there a way around this? (e.g. BFD on the static route pointing to the loopbacks or similar).
If one is trying to get to fast failover times without OSPF or similar... BFD with BGP should be the way to accomplish it.
Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
