CISCO 3750 12.2(25) SEE2Cisco 2950 12.1.(22) EA2
We codevelop software with teams from other companies and they come to our site
to do this. With these companies we have setup Lan to Lan tunnels. So when they
come we allow them to connect to our Guest network. Then they VPN into their
companies and connect to a particular host on our end. It does not seem the
best way to me.
I was thinking about letting them connect to our company LAN then configure
ACLs in a switch, apply them to specific ports and allow them access only to
an specific host on port 80 and 443.
If it makes any difference I will throw these 2 scenarios in:
1- destination host and guest users connected physically to ports in the same
switch
2- destination host and guest users connected in different switches uplinked
with switches in between . I wonder it if is needed one set of ACLs on both
switches or does it matter?
Thanks for your help
JAR
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
