Mohammad, Take a look here:
Enhanced Object Tracking http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/fthsrptk .html Reliable Static Routing Backup Using Object Tracking http://www.cisco.com/en/US/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbac kupx.html Embedded Event Manager (EEM) http://www.cisco.com/en/US/products/ps6815/products_ios_protocol_group_h ome.html I think this should give you some ideas... Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Mohammad Khalil Sent: Sunday, July 12, 2009 11:28 To: [email protected] Subject: [c-nsp] backup cpe hi all i have a router with 2 ethernet interfaces one is connected to a microwave device (Leased Line) and the other is connected to a WiMAX CPE now if the leased line went down how im going to activate the cpe automatically ?? there is no dialing in the CPE it obtain a DHCP ip address from the BS once the LOS is there Thanks _________________________________________________________________ More than messages-check out the rest of the Windows Live(tm). http://www.microsoft.com/windows/windowslive/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
