Clue, I am pretty sure that it doesn't support SSL VPN's either. All NetPro discussions show the same results. Assuming you are support multiple customers and want to give them access to their firewall, or whatever you reason for choosing multiple context may be, you should use another ASA pair in Active/Standby to provide VPN termination services. You may have to mess around with RRI, but you should be able to pull off customer segregation using VLANs.
-ryan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Clue Store Sent: Sunday, July 19, 2009 2:14 PM To: [email protected] Subject: [c-nsp] ASA Multiple Context Mode Hi All, As I understand that the ASA in multiple context mode does not support "VPN's", does this also inclue SSL VPN's?? Someone has mentioned that it turns off IPSEC engine in this mode, but I have not been able to find anywhere where it says SSL VPN's are not supported. If it doesn't support SSL VPN, what are other folks doing for VPN's in this situation where multiple contexts are being used?? TIA, Clue _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
