Found a similar post on NSP in Feb 2009. http://www.gossamer-threads.com/lists/cisco/nsp/103408
Need the command "ip dhcp bootp ignore" but this isn't supported on the 7600. http://www.cisco.com/en/US/docs/ios/12_2t/12_2t8/feature/guide/ftdbootp. html#wp1026678 Cheers. Andy -----Original Message----- From: Andy Saykao Sent: Tuesday, 21 July 2009 2:45 PM To: 'Church, Charles'; [email protected] Subject: RE: [c-nsp] Strange NAT and DHCP Problem Hi Charles, Tried what you suggested but no go. no ip bootp server clear ip dhcp binding <IP> Client has obtained an "infinite" lease again. 172.16.75.119 0021.e9a0.777c Infinite Automatic Cheers. Andy -----Original Message----- From: Church, Charles [mailto:[email protected]] Sent: Monday, 20 July 2009 10:12 PM To: Andy Saykao; [email protected] Subject: RE: [c-nsp] Strange NAT and DHCP Problem The infinite DHCP entry is probably a BOOTP client, which doesn't have the concept of a lease. There are knobs (ip dhcp bootp ignore) that can turn off bootp, and only allow DHCP. I think by default, it'll service both. Chuck This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. Please notify the sender immediately by email if you have received this email by mistake and delete this email from your system. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the organisation. Finally, the recipient should check this email and any attachments for the presence of viruses. The organisation accepts no liability for any damage caused by any virus transmitted by this email. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
