Yes they are. The biggy to watch out for is when you remove a member. Make
sure the member you want to remove is powered off before removing the stack
cables.
A minor item is to make sure when removing the stack cables to insert the
new switch, make sure you don't isolate one of the in-use switches...hehe.
You can upgrade the code previous to insertion or after you get it to join.
I normally do it before as it's smoother. Also don't forget to provision
the imcoming switch on the existing stack.
tv
----- Original Message -----
From: "Jeff Kell" <[email protected]>
To: "cisco-nsp" <[email protected]>
Sent: Wednesday, July 22, 2009 3:13 PM
Subject: [c-nsp] quick 3750 question...
Are the stack members "hot swappable" ?
Or is it power-cycle time when changing the stack cable configurations?
[Wanting to add a new member...]
Jeff
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
