This will be my first experience with the new Cisco Modular IOS. I am tasked with upgrading the IOS (which is already modular) of a 6500.
The current image is already installed on disk0:/sys... Just for peace of mind, and a good nights sleep :-)...I was hoping for some confirmation from the group if this is the correct way to upgrade the IOS (the boss is against patching the IOS). So here are my steps... 1) copy the new IOS to disk0: 2) 'install file disk0:<IOS image> disk0:/newsys 3) 'install bind disk0:/newsys' 4) Change the boot statements within the configuration to set the new IOS to first boot, setting the old IOS to send boot...just in case :-). 5) Reload My questions are on steps 3 and 5. Step 3 - Am I supposed to be installing the file into a different directory than the current (ie. /sys vs /newsys). It is my understanding that if I try to install the new IOS into the current directory it will ask to overwrite the image, which I don't want, as I would like to keep the 'known good' image as a backup. Step 5 - Am I just being old school, or do I need to reload the chassis? Is their a more time effective method, or is this just for patching. Thanks to All!!! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
