On Mon, Jul 27, 2009 at 09:25:37PM +0100, Ross Vandegrift wrote:
Hey all,
Everytime I need to programmatically lookup prefixes in the routing
table on our 6500s, I try to find a better MIB than I use today.
Today, I discovered CISCO-IETF-IP-FORWARD-MIB - a pre-standard
IP-FORWARD-MIB that lives under ciscoExperimental. It's listed in
Cisco IOS MIB Locator as supported by my image.
Unfortunately, this seems to count as an implementation:
$ snmpbulkwalk -v 2c -c public lab-6506
CISCO-IETF-IP-FORWARD-MIB::ciscoIetfIpForward
CISCO-IETF-IP-FORWARD-MIB::cInetCidrRouteNumber.0 = Gauge32: 0
Any way to get this MIB populated?
AFAIK it only contains IPv6 entries at the current time.
Unfortunately I'm not sure there's a good way to easily lookup routes in
a cisco via SNMP.
--
Ross Vandegrift
[email protected]
"If the fight gets hot, the songs get hotter. If the going gets tough,
the songs get tougher."
--Woody Guthrie
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
