Kevin Loch wrote:
Try adjusting 'service counters max age' to zero if you haven't already.
It has not changed anything.
As others have pointed out a delay of 3-4 minutes is not normal
What does your SP (not RP) cpu usage look like? Try disabling netflow
if your SP cpu usage is maxing out.
Disabling netflow helps. But the SP is not so heavily loaded:
#remote command switch sh proc cpu | i seco
CPU utilization for five seconds: 19%/1%; one minute: 41%; five minutes: 40%
#remote command switch sh proc cpu | i NDE
269 64 1 64000 0.00% 0.00% 0.00% 0 Netflow
NDE Task
470 21333328 1711723 12463 3.19% 5.75% 5.67% 0 NDE - IPV4
471 1120 95010 11 0.00% 0.00% 0.00% 0 NDE - MPLS
472 792 95010 8 0.00% 0.00% 0.00% 0 NDE - L2
473 805240 158391 5083 0.00% 0.00% 0.00% 0 NDE - IPV6
--
Grzegorz Janoszka
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
