I rebooted a 7507 router that had a site connected with 3 T1's and now all the traffic is nailing one line instead of being distributed over all 3 using the static routes/CEF.
I did look at the Cisco troubleshooting tips but didn't see anything immensely helpful. Here is a config snippet on the 7507 side (it's obviously nothing whizzy). Has anyone seen this before? I did an ip clear cache and also tried doing a shut/no shut on each line individually on the 7507, but the traffic to the customer's 28xx router always sacks one line. It seems like in the past I did some kind of clear on the 7507 and things got better, but I can't recall what that may have been. Thanks, CJ 7507 (all PA adapters on the same VIP) config. One T1 comes in on a chan DS3 card breaking out individual T1¹s, and the other 2 T1¹s come in on a 4-port PA adapter T1 card. I¹m not using dCEF since I have never had good luck with it. ip cef ! interface Serial1/0/0/12:0 bandwidth 1536 ip address x.x.x.x y.y.y.y load-interval 30 no fair-queue down-when-looped no cdp enable ! interface Serial1/1/0 bandwidth 1536 ip address x.x.x.x y.y.y.y load-interval 30 no fair-queue down-when-looped no cdp enable ! interface Serial1/1/3 bandwidth 1536 ip address x.x.x.x y.y.y.y load-interval 30 no fair-queue down-when-looped no cdp enable _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
