Hi Graham -
The same rules for confreg that apply to the other c6k sups apply here as well.
Typical/recommended for sup32 is 0x2102. To
ignore config 0x2142 will do it. 0x42 should work
too, but for one thing, ignore break will be
disabled, which is not desirable (router can drop
to rommon during runtime due to deliberate/spurious break).
Hope that helps,
Tim
At 06:07 PM 7/30/2009, Graham Wooden asserted:
Hi there,
Not much out there on this for the Sup32. But since the Sup32 is a upgraded
MSFC2, will the config register ³0x42² bypass the config?
Someone borked up the aaa auth and I can't get into it. Bah.
Thanks,
-graham
_______________________________________________
cisco-nsp mailing list [email protected]
<https://puck.nether.net/mailman/listinfo/cisco-nsp>https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
<http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pipermail/cisco-nsp/
Tim Stevenson, [email protected]
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
