Hi there, Your switch port that the AP is connected to - is it in trunk mode? Like "switchport trunk encap dot1q" ?
On 8/1/09 4:52 PM, "snort bsd" <[email protected]> wrote: > > Hi: all: > > I got ciscoAP 1200 configured and can connect it via wireless without > problems. But the system connecting to the AP can't pick up any IP address. > > dot11 ssid lab vlan 20 > vlan 20 > max-associations 10 > authentication open > authentication key-management wpa > guest-mode > mbssid guest-mode > wpa-psk ascii 7 "whatever key" > information-element ssidl wps > ! > dot11 ssid test vlan 10 > vlan 10 > max-associations 10 > authentication open > authentication key-management wpa > mbssid guest-mode > wpa-psk ascii 7 "whatever key" > information-element ssidl wps > > what else I didn't do right? > > Thanks > > > > ______________________________________________________________________________ > ______ > Access Yahoo!7 Mail on your mobile. Anytime. Anywhere. > Show me how: http://au.mobile.yahoo.com/mail > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
