Hello, Guys, are there any drawbacks of doing the following:
interface Lo0 ip address 10.10.10.1 255.255.255.0 ! interface FastEthernet0/0.1 encapsulation dot1q 1 native ip unnumbered Lo0 ! ip route 10.10.10.0 255.255.255.0 FastEthernet0/0.1 ! as opposed to having ip address configured directly on the interface as usual? I need that ip address to stay always up regardless of Fa0/0 state, 'cause it's used for other services that should stay up and I'd prefer to avoid assigning another ip address exclusively for loopback use. It seems to work in my lab, but I thought I'd better ask... Thanks, Michael _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
