Iam trying to apply Hierarchical policymap under a inter vlan it gives an error:
it is 7606 with RSP 720 and ES 40 cards. PE4(config)#int vlan 299 PE4(config-if)#service-policy output testce Hierarchical policymap is not supported for this interface. Configuration failed! here is the policy-map: policy-map testce class class-default police 450000000 service-policy pe-ce-450m Nested policy map: policy-map pe-ce-450m class pe-ce-450m-s bandwidth percent 4 random-detect random-detect precedence 0 300 1000 1 random-detect precedence 1 300 1000 1 class pe-ce-450m-p bandwidth percent 30 random-detect random-detect precedence 2 100 150 1 random-detect precedence 3 750 1000 1 random-detect precedence 6 750 1000 1 random-detect precedence 7 750 1000 1 class pe-ce-450m-nrt police cir 292496000 bc 146248 be 4470 conform-action transmit exceed-action drop violate-action drop ********************* is i use shaping than it says it is not supported. policy-map testce class class-default shape average 450000000 service-policy pe-ce-450m -> same as above... PE4(config)#int vlan 299 PE4(config-if)#service-policy output testce shape average command is not supported in output direction for this interface Configuration failed! how can we apply shaping on VLAN interface... subinterface configuration it works but not on VLAN interface. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
