why you don't configure another vpdn-group with another virtual-template
interface? it should be working very well!
--------------------------------------------------
From: "Ed Lazerus" <edlazeru...@gmail.com>
Sent: Thursday, August 06, 2009 2:50 PM
To: <cisco-nsp@puck.nether.net>
Subject: [c-nsp] Single LNS, two providers
Hi,
We have an LNS (7200) configured for DSL from one provider, we wish to
keep
this provider, however they only offer us DSL1, but we are negotiating
with
another wholesaler to supply us with ADSL2+ (only) .
My question is how easy is it to have this single LNS server to service
all
customers using two wholesalers
Is it a mater of duplicating the following?
vpdn-group cca1
accept-dialin
protocol l2tp
virtual-template 1
source-ip 10.255.255.2
lcp renegotiation on-mismatch
l2tp tunnel password XXXXXXX
ip mtu adjust
!
interface Virtual-Template1
ip unnumbered Loopback0
ip tcp adjust-mss 1360
peer default ip address pool default
ppp mtu adaptive
ppp authentication pap chap
/Ed/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
