What about giving them a different IP address (via RADIUS or DHCP), for which there is a route-map to webserver? Yes, it's not immediate, but with PPPoA/E users could you could "clear int Vi#", CM users just wait for their next DHCP lease.
Frank -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Walter Keen Sent: Thursday, August 06, 2009 11:52 AM To: 'Cisco-nsp' Subject: [c-nsp] soft-disco/redirection We're trying to formulate a plan to do a soft-disconnect or redirect users to a site where they can pay their bill online to get reconnected when they get disconnected for billing. Mostly we're talking about either bridged or pppoa dsl customers, or cablemodem customers. Using 7204's and 7246vxr respectively. Our intial thoughts included using some route-maps, but I was wondering if anyone had experience in doing this, and if there are any more graceful ways of doing this (including using snmp to trigger this instead of a scripted telnet session) -- Walter Keen Network Technician Rainier Connect _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
