If the ISP is in the middle , who is the upstream and what does the L2VPN do? can you provide a simple diagram?
Dave. jack daniels wrote: > Hi All, > > We had a requirement in which customer wants that the ISP- AS should not be > visible when route are advertised to internet via a upstream(L2 VPN > solution). > Can we use BGP command no-prepend with Replace AS attribute to hide ISP AS > in internet. ------------ > > Can we peer with customer using local AS which will be private AS.We will > use no prepend command along with Replace AS which will replace ISP AS with > the private AS which is used for Peering.While going out to any > international Peer we will remove private AS . On internet only customer AS > and Peer AS will be visible. > > Please advise is this solution will work . Also advise if any better > solution for this scenario. > > > Thanks and Regards > J.Daniels > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
