First of all, to access a modem connected to an async or aux port of a router 
it's possible by telneting the router on port 2000 + the line number the modem 
is connected, if you perform a "show line" command on the router you'll get 
something like this, for example:
   Tty Typ     Tx/Rx    A Modem  Roty AccO AccI   Uses   Noise  Overruns   Int
     0 CTY              -    -      -    -    -      0       0     0/0       -
     1 AUX      0/0     -    -      -    -    -      0       0     0/0       -
*    2 VTY              -    -      -    -    -     22       0     0/0       -

In this case, if the modem was connected to the AUX port you would telnet the 
router on port 2001 and you can get direct access to modem control and be able 
to perform any AT commands.

I also like minicom for direct serial access, but now for normal console I use 
a nice graphical took named gtk term which is more simple and friendly if 
you're in a GUI environment, for the command line and specific modem protocols 
and commands support, minicom is still the one you want.


-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Ge Moua
Sent: Tuesday, August 11, 2009 3:53 AM
To: Gregory Boehnlein
Cc: [email protected]
Subject: Re: [c-nsp] Linux Com Driver to Modem on Cisco Terminal Server

I like "minicom".

Regards,
Ge Moua | Email: [email protected]

Network Design Engineer
University of Minnesota | Networking & Telecommunications Services



Gregory Boehnlein wrote:
> Hello,
>       Received a request from a client that needs to access a modem on a
> Cisco router from standard serial applications on a Linux box. These are for
> standard applications that do modem control (I.E. ATDT1XXXXXXXXX etc..) and
> not PPP.
>
>       There used to be a few piece of software out there that did it, but
> I can't seem to find any of them. Anyone have any solutions for this?
>
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/



************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer 
viruses.
************************************************************************************





__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4324 (20090811) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com



__________ Information from ESET NOD32 Antivirus, version of virus signature 
database 4324 (20090811) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer 
viruses.
************************************************************************************



_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to