Our Customer is have problems getting them to work in what is called ASH
mode. The units have 2 methods of provisioning, ASH and TL1 mode. They
do not want to use TL1 mode as they are familiar with ASH mode better.
Cisco told them that the unit internal software cannot be converted from
TL1 to ASH mode since they are to old. Even though the manual states
that it should work.
Is there some sort of command that is not listed in the manual that can
convert the shell from TL1 to ASH?
---
regards,
Nathaniel Bernadeau
Gallant Systems, LLC
11064 Livingston RD Suite 106-C
Fort Washington, MD 20744
Toll Free: 888-836-3751
Ph: 301-627-6358
Fax: 240-823-6897
Cell: 202-246-2229
[email protected]
www.gallantsys.com
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
