Can you HTTPS to the device using a normal browser and get the initial screen?
Chuck ----- Original Message ----- From: "Leslie Meade" <[email protected]> To: <[email protected]> Sent: Tuesday, August 11, 2009 2:30 PM Subject: [c-nsp] ASDM not working after upgrades >I am getting the error of > Unable to launch device manager from 10.1.254.254 > > I have uploaded the correct files and change the config to match > > ASA5540-01# sh run asdm > asdm image disk0:/asdm-621.bin > asdm location 10.1.6.25 255.255.255.255 inside > asdm history enable > > ASA5540-01# sh run http > http server enable > http 10.1.6.0 255.255.255.0 inside > > ASA5540-01# sh flash > --#-- --length-- -----date/time------ path > 131 11348300 Aug 11 2009 10:09:00 asdm-621.bin > 132 16275456 Aug 11 2009 10:10:10 asa821-k8.bin > > If I roll back to the older code and asdm it works fine. Any ideas > > > Leslie > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
