Hi folks I want to configure my ASA for remote access via outside however it configuration do not work, IP are fake for reasons security. My configuration is
In the outside interface I have interface Vlan2 nameif outside security-level 1 ip address 200.10.45.98 255.255.255.240 telnet 200.100.50.0 255.255.255.0 outside ssh 200.100.50.0 255.255.255.0 outside Also, I do not have any ACL In the logs I can see: %ASA-4-402117: IPSEC: Received a non-IPSec packet (protocol= TCP) Could you help me with this configuration? Regards. -- "The network is the computer" _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
