Has anyone seen an issue with a NPE-G2 where insertion or removal of a USB flashdrive causes the router to crash and reboot?
This happened to one of our routers earlier today. Cisco IOS Software, 7200 Software (C7200P-IPBASEK9-M), Version 12.4(24)T1, RELEASE SOFTWARE (fc3) *Aug 26 16:07:11.375: %USB_HOST_STACK-6-USB_DEVICE_CONNECTED: A Full speed USB device has been inserted in port 0. *Aug 26 16:07:16.999: fnu1362ControlTransfer Control Transfer did not complete!1 *Aug 26 16:07:16.999: fnu1362ControlTransfer speed: 0x2, pipe: 0x80000080, status: 0x31 *Aug 26 16:07:16.999: fnu1362ControlTransfer, bmRequestType: 0x80, byRequest: 0x6, wValue: 0x100, wIndex: 0x0, wLength: 0x8 *Aug 26 16:07:17.007: %USB_HOST_STACK-5-USB_ENUM_FAIL_GETDESCR: Failed to enumerate a USB device as not able to read the device's description.CMD: 'dir us' 12:07:18 EDT Wed Aug 26 2009 CMD: 'dir usb' 12:07:20 EDT Wed Aug 26 2009 CMD: 'dir ' 12:07:21 EDT Wed Aug 26 2009 12:07:22 EDT Wed Aug 26 2009: Unexpected exception to CPU: vector 300, PC = 0x7 25C0C , LR = 0x725BB8 -Traceback= 0x725C0Cz 0x726C10z 0x727C9Cz 0x1EE960z 0x6D00C8z 0x6CCC88z A bit scary that a flashdrive could bring down the router. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
