I have a UBR 7223 under my care and I've got the following code on it:
1 -rw- 19770888 Aug 17 2006 21:19:32 -05:00
ubr7200-k8p-mz.123-9a.BC9.bin
2 -rw- 23077708 Jul 16 2009 10:47:46 -05:00
ubr7200-ik9su2-mz.123-23.BC7.bin
The machine has this linecard in it:
Slot 2:
DOCSIS Modem Card (ASIC) 1 Down/1 Up Port adapter, 1 port
Port adapter is analyzed
Port adapter insertion time 00:19:46 ago
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
Top Assy. Part Number : 800-04767-01
Board Revision : J0
CLEI Code : CN1IS30AAA
Deviation Number : 0-0
Fab Version : 01
PCB Serial Number : CAB0437EAV3
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Calibration Data : Minimum: -10 dBmV, Maximum: 25 dBmV
Calibration values : 0x9CC0 0x9A80 0x9A90 0x96B0 0x96B0
This is apparently an MC11C. We suspect it's bad due to intermittent
misbehavior and a replacement was ordered, but we're not so swift and it's
an MC11. Neither image works with the new card and only the older image
works with the MC11C.
I could really use a tip from someone who knows these things as to what
to do. About 3% of our customers are on this thing and we'd just as soon
give the location away but until we find a home for it we have to keep it
running.
--
mailto:[email protected] //
GoogleTalk: [email protected]
IM: nealrauhauser
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
