Daniels - Did you configure on the Juniper side too ?? [mpls ldp sync] Are you running OSPF as IGP and which release on GSR ?
Try changing the holddown timer to see if it makes a change. http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsldpsyn.html#wp 1100282 /Shankar -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of jack daniels Sent: Thursday, September 03, 2009 10:28 AM To: [email protected] Subject: [c-nsp] mpls ldp sync I'm in middle of a issue , request your help in this issue - We have a GSR 12416 connected to JUNIPER router. We are running OSPF between them. OSPF neighbourship comes up :) .... BUT now when I enable under ospf "mpls ldp sync" --- ospf neighbourship goes down and doesn't comes up. Request your help in this. Regards J.Daniels _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
