Not sure if I understood your question, but it seems the only thing you need to do is: conf t boot system flash bootflash:cat4000-i5s-mz.122-25.EWA11.bin end wr
sh bootvar You need to include the "bootflash:" part... On Sat, Sep 5, 2009 at 13:27, jack daniels <[email protected]> wrote: > Hi All, > > I have a querry for issue I'm facing--- > > If I put boot sequence - > > sh bootvar > BOOT variable = cat4000-i5s-mz.122-25.EWA11.bin,1; > CONFIG_FILE variable does not exist > BOOTLDR variable does not exist > Configuration register is 0x2102 > > > > > sh bootflash > -#- ED ----type---- --crc--- -seek-- nlen -length- > ---------date/time--------- name > 1 .. image 165C41B7 C74594 30 12535060 Jun 14 2007 01:25:48 > +05:30 cat4000-i9s-mz.122-25.EWA8.bin > 2 .. image B9D0BD21 1848198 31 12401540 Nov 5 2007 11:13:00 > +05:30 cat4000-i5s-mz.122-25.EWA11.bin > 3 .D config 79E21BAD 1850F08 6 36078 Jun 26 2009 10:15:19 > +05:30 backup > 4 .. config D3AEB40F 1859CD0 6 36165 Sep 5 2009 15:32:50 > +05:30 backup > > > and the valid file is in BOOTFLASH , will switch look for file in bootflash > (BY DEFAULT - switch behaviour) when it doesnt finds file in FLASH. > > Please send supporting doc if any. > > Thanks and Regards > J.Daniels > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > -- BH _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
