Hi Biddu, If you wish to see route table updates, then you can use "debug ip routing vrf <name>". This will show you the updates as they are applied to the VRF routing table.
If you wish to see what BGP specifically is doing then something like "deb ip bgp vpnv4 unicast updates" should help you out. You will see routes like "100:1:10.200.0.189/32" which is 10.200.0.189 for VRF with RD 100:1. Hope this helps. regards, Tony. --- On Tue, 15/9/09, Ved Labs <[email protected]> wrote: > From: Ved Labs <[email protected]> > Subject: [c-nsp] debug bgp updates within VRF > To: [email protected] > Received: Tuesday, 15 September, 2009, 10:31 PM > How do i *debug bgp updates within > VRF* > ** > *Thanks,* > *Biddu.* __________________________________________________________________________________ Get more done like never before with Yahoo!7 Mail. Learn more: http://au.overview.mail.yahoo.com/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
