I've been looking through the Cisco doc but didn't found what I was looking for, therefor this question :
I transformed a 2801 router which we used as a dialin server to a console server. The config seems to work, I can do a telnet xxx 2018 to get access to serial port 0/1/1, also ssh -l user:portnumber works. But I still have 2 problems : - The escape character doesn't work when using ssh, also e.g. defining CTRL-Z as disconnect character doesn't work. The only way to stop the connection, is by killing it at the ssh client side. Is there another way to stop the ssh connection, just like the telnet escape character ? - Is there a way to access the async line from within the router itself ? So just a telnet/ssh to the router and then something like 'connect line XXX' ? The connect command on the router seems an equivalent of telnet for outgoing tcp sessions and I don't see another command that could do this. I'm running c2801-ipbasek9-mz.124-25a on the router. Thanks, Wim Holemans Netwerkdienst Universiteit Antwerpen _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/