Hank, This is available on the 6500/7600 through microflow policers: http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/con figuration/guide/qos.html#wp1571584
Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Hank Nussbacher Sent: Wednesday, September 23, 2009 08:48 To: [email protected] Subject: [c-nsp] Limiting b/w per IP? I haven't followed all the new bells and whistles in IOS so maybe something new is there that can handle this age old problem for me. I want to be able to rate limit all IPs so that no single IP on an interface can eat more than say 20% of the available b/w (inbound and outbound). I do not want to define every single IP of the segment in an ACL but can if the solution is clean. Not interested in protocol rate-control - just IP b/w. Cisco snippets or URLs welcome. Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
