Is it dumping to rommon. If so just boot <imagelocation>:<imagename>
Most likely have a corrupt config register on the switch processor.
Sh boot ! for the RP
Remote command switch sh boot ! for the SP
Conf t
Config-register 0x2102
End
Now confirm that they are correct on both the RP and SP. I think if you have
too many boot command lines in the config, the chance of the SP becoming
corrupt is higher.
David
--
http://dcp.dcptech.com
> -----Original Message-----
> From: [email protected] [mailto:cisco-nsp-
> [email protected]] On Behalf Of Renelson Panosky
> Sent: Sunday, September 27, 2009 2:50 PM
> To: [email protected]
> Subject: [c-nsp] 6509-E with sup720
>
> Everytime i power this switch i am getting this error Autoboot: failed,
> BOOT
> string is empty and i can't remember the code to bypass it can anybody
> help
> me with this?
> _______________________________________________
> cisco-nsp mailing list [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
