On 05/07/2009 16:51, Nick Hilliard wrote:
Is there anyone out there who has managed to get layer2 netflow data export working for l2 switched ipv6 traffic on a c65k? I've been beating my head against a wall trying to get it to work and just can't seem to.
hmmm, known limitation, it appears:
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/nde.html#wp1171043
which reads:
•The following IPv4 Netflow and NDE options are not available for IPv6 flows: [CSCek55571] •Aggregation support (ip flow-aggregation cache command) •Export of Layer 2 switched IPv6 flows •Netflow and NDE sampling •NDE filter support
While this documentation is for SR, the same limitation apparently applies to SX. An internal documentation bug has been raised to get the limitations put into the SX train documentation, which doesn't currently note the problem:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/nde.html
Nick _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
