On Wed, 2009-09-30 at 12:45 +0200, Rinse Kloek wrote: > "The Policy Feature Card (PFC) and any Distributed Feature Cards > (DFCs) provide hardware support for policy-based routing (PBR) for > route-map sequences that use the match ip address, set ip next-hop, > and ip default next-hop PBR keywords." > > How do I have to read this rule ? Only if I use these 3 commands, the > traffic will be policy routed through the PFC ?
That is as I understand it yes. > And what about other rules. It looks like other Policy Routing rules > don't even get processed. So the only way the get these rules matched > is disabling mls ip on the interface where the route-map is set ? That also seems right, though I thought it was "mls switching unicast"; the commands seem to enable/disable each other though. The switch might process the traffic in software even without disabling hardware switching, but that wouldn't always be a good idea, considering the perfomance impact. Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
