well, in cross-stack etherchannel, the only supported protocol is LACP,
not "mode on"
Jauhen.
luismi wrote:
Hi,
We had a problem with a stack 3750 here and the configuration is..
Stack (2x3750) === FEC === SW 2960
It is a cross etherchannel configuration.
3750 is not working with L3 mode at all.
The FEC config is "mode on".
So, one the 3750 had a problem yesterday and it creates disruption in
the connectivity with the 2960 switches. I didn't expect from
Etherchannel. It is supossed that is pretty fast but it was not.
I would like to see if there is anyone here with a similar configuration
or other one to fix this situation.
Any comment is welcome
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
