Lasher, Donn wrote:
To clarify, this depends on both the card type (engine 0/1/2/3/4/5) and
traffic type (mpls, DSCP marking, etc). You can be doing everything
right, and still have 50% CPU with the wrong combination of those two..
(For example, MPLS Labeling and Engine0 GIG-E card at 100M of traffic)
Right, but that'd be 50% CPU on the linecard, not on the xRP, right?
(In other words, you'd find 50% CPU by doing 'execute-on all sh proc c s
| e 0.0.%' but wouldn't find it by doing 'sh proc c s | e 0.0.%'.)
pt
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
