Juan,
I would recommend that you take a look at the 4948 switches. They could be a good choice for small routing devices. Be aware that there is a relatively low limit for the number of routes they can support. If you require also QOS support, and more fancy features (like for example NetFlow), you should be looking at routers and not desktop switches (which are usually designed for LAN environments). Arie From: Juan C. Crespo R. [mailto:[email protected]] Sent: Friday, October 09, 2009 22:35 To: Arie Vayner (avayner) Cc: [email protected] Subject: Re: [c-nsp] Cisco Layer 3 and Giga BGP Jumbo Packets Not full BGP Probably OSPF, ISIS Core Arie Vayner (avayner) escribió: Juan, Can you provide more information about your requirements? Routing protocols? Number of routes? Application? Etc? Arie -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Juan C. Crespo R. Sent: Friday, October 09, 2009 20:01 To: [email protected] Subject: [c-nsp] Cisco Layer 3 and Giga Guys Could any one of you advice me a good Switch with Layer 3, Jumbo Packets support ? I was thinking about one 3550 but I'm not sure Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
