An NPE400 should do fine if you're looking used or on a tight budget, but if you're looking to buy for growth, just get a G2 and be done with it.
Frank -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Antonio Querubin Sent: Sunday, October 11, 2009 5:27 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] 7206VXR NPE for ~1000 RBE interfaces I'm researching upgrading a 7206VXR to handle about 1000 RBE interfaces off of either 2 T3 or 1 OC3 ATM line. Anybody got any recommendations on which NPE would handle this scenario? Antonio Querubin 808-545-5282 x3003 e-mail/xmpp: t...@lava.net _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/