On Oct 14, 2009, at 1:19 PM, Alan Buxey wrote:
just wondered what folk did out there to monitor switch stacks (eg stackwise+ switch stacks like 3750e, 2975gs etc (not the older gigastack ones....) ) - using the basic methods such as ICMP will only show the presence of connectivity to the stack but not the actual health of the stack - eg one member is missing. I'm looking at maybe SNMP but support for MIBS in stacks seems somewhat poor
They show up fine, at least on recent code. On earlier versions of code (2 years ago or so), it was very buggy and was not reliable. We monitor the following. There have been occasions when the switch stack ports fail and this caught it. Cheers, Dale IF-MIB::ifDescr.5365 = STRING: StackPort1 IF-MIB::ifDescr.5366 = STRING: StackSub-St1-1 IF-MIB::ifDescr.5367 = STRING: StackSub-St1-2 IF-MIB::ifDescr.5368 = STRING: StackPort2 IF-MIB::ifDescr.5369 = STRING: StackSub-St2-1 IF-MIB::ifDescr.5370 = STRING: StackSub-St2-2 IF-MIB::ifDescr.5371 = STRING: StackPort3 IF-MIB::ifDescr.5372 = STRING: StackSub-St3-1 IF-MIB::ifDescr.5373 = STRING: StackSub-St3-2 IF-MIB::ifOperStatus.5365 = INTEGER: up(1) IF-MIB::ifOperStatus.5366 = INTEGER: up(1) IF-MIB::ifOperStatus.5367 = INTEGER: up(1) IF-MIB::ifOperStatus.5368 = INTEGER: up(1) IF-MIB::ifOperStatus.5369 = INTEGER: up(1) IF-MIB::ifOperStatus.5370 = INTEGER: up(1) IF-MIB::ifOperStatus.5371 = INTEGER: up(1) IF-MIB::ifOperStatus.5372 = INTEGER: up(1) IF-MIB::ifOperStatus.5373 = INTEGER: up(1) CISCO-STACKWISE-MIB::cswSwitchState.1001 = INTEGER: ready(4) CISCO-STACKWISE-MIB::cswSwitchState.2001 = INTEGER: ready(4) CISCO-STACKWISE-MIB::cswSwitchState.3001 = INTEGER: ready(4) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
