On Mon, 2009-10-19 at 15:33 -0700, Alex Wa wrote: > Why do we need to specify dst-port as in > > ip sla 1 > udp-jitter <dest-ip> <DEST-PORT> > > even when the ip sla responder doen't have one particular port where > it listens to?
If you only enable "ip sla responder" the query device uses control packets to enable the port you specify on the receiving device. If you specify a port on the receiving device (e.g. "ip sla responder udp-echo port 65500") you can run SLA probes without control packets from the query device: ip sla 1 udp-echo 10.0.0.1 65500 control disable ! So the port is always used, but the IP SLA control packets tells the receiving device to listen on the specific port before the probe is sent. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
