A lot of my WS-X6148A-GE-45AF showing up with minor error after i upgrade the IOS on my switch, does any body here have any idea why and how to fix it?
I've tried the following but still showing up with errors 1) i reset the module 2) i reseat the module ( take it out and put it back in) Take a look at the sho mod #sho mod Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD093908LP 2 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD093909ST 3 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD0938074N 4 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAL1007DK13 5 9 Supervisor Engine 32 8GE (Active) WS-SUP32-GE-3B SAD0939053K 6 48 48-port 10/100/1000 RJ45 EtherModule WS-X6148A-GE-45AF SAD093807LW Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 0015.c649.d1e0 to 0015.c649.d20f 1.3 8.4(1) 8.5(0.46)RFW Ok 2 0015.c699.0790 to 0015.c699.07bf 1.3 8.4(1) 8.5(0.46)RFW Ok 3 0015.63db.d030 to 0015.63db.d05f 1.2 8.4(1) 8.5(0.46)RFW Ok 4 0016.c8ca.c350 to 0016.c8ca.c37f 2.0 8.4(1) 8.5(0.46)RFW Ok 5 0013.809d.e5ce to 0013.809d.e5d9 4.2 12.2(18r)SX2 12.2(18)SXF1 Ok 6 0015.63db.a090 to 0015.63db.a0bf 1.2 8.4(1) 8.5(0.46)RFW Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093908VM 1.2 Ok 2 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093908WP 1.2 Ok 3 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093806F7 1.2 Ok 4 IEEE Voice Daughter Card WS-F6K-48-AF SAL1007DAQZ 2.0 Ok 5 Policy Feature Card 3 WS-F6K-PFC3B SAD093906E5 2.1 Ok 5 Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A SAD09390847 3.0 Ok 6 IEEE Voice Daughter Card WS-F6K-GE48-AF SAD093806HK 1.2 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 3 Pass 4 Pass 5 Minor Error 6 Pass VACO_24_5C# On Thu, Oct 22, 2009 at 12:46 PM, Peter Kranz <[email protected]> wrote: > Hi Renelson, > Without telling us the errors, not sure how we can diagnose your > issue. > > Peter Kranz > Founder/CEO - Unwired Ltd > www.UnwiredLtd.com <http://www.unwiredltd.com/> > Desk: 510-868-1614 x100 > Mobile: 510-207-0000 > [email protected] > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Renelson Panosky > Sent: Thursday, October 22, 2009 8:07 AM > To: [email protected] > Subject: [c-nsp] Problem after upgrading ios on the 6509-E > > A lot of my WS-X6148A-GE-45AF showing up with minor error after i upgrade > the IOS on my switch, does any body here have any idea why and how to fix > it? > > I've tried the following but still showing up with errors > > 1) i reset the module > 2) i reseat the module ( take it out and put it back in) > > Renelson > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
